Removing and re-inserting a microSD card (ENS Cube only)

Removing and re-inserting a microSD card (ENS Cube only)

Please review the following video:


  1. The card slot could be obstructed by the HDMI cable. Remove to access.
  2. The card slot has a spring-loaded seating/release mechanism. Push to release/insert.
  3. ***Pay attention to the card's orientation*** The card must be inserted upside down (gold contacts facing UP), with contacts facing towards the device.

    • Related Articles

    • How to clear the SD/USB media partition before reflashing

      How to clear the previously flashed ENS image from an SD card or a USB stick so that Windows can see the card, and write a new image to the device.  ***CAUTION*** This is a potentially dangerous procedure that if done hastily and without ...

    • How to transfer a sign to another account

      If you have received an unregistered sign from ENS, there is a separate procedure found here. If you need to move an already-registered sign to one of your other user accounts, perform the following actions: Find the Transfer Sign menu option in the ...

    • Creating a USB Repair Stick

      You must use a PC for the procedure below. macOS requires a different flashing utility. Obtain a 4GB or larger USB flash drive and insert it into your PC Download the latest OS for your device here: https://www.runsam.com/downloads - select and ...

    • Flashing BIOS, Access3 only

      **** DO NOT ATTEMPT THIS UNLESS INSTRUCTED TO DO SO BY AN ENS SUPPORT REPRESENTATIVE! **** **** A FAILED ATTEMPT AT FLASHING THE BIOS MAY RENDER THE DEVICE COMPLETELY UNUSABLE **** MATERIALS REQUIRED: USB THUMB DRIVE, USB KEYBOARD, SAMSTICK CONNECTED ...

    • How do I get my sign connected to the internet?

      If this is your first time connecting your sign to the internet, you can get your sign connected in one of a few ways Ethernet cable This is the simplest method Simply plug in an Ethernet cable into the S.A.M Stick's Ethernet port and you should be ...